| High Speed Machining Chart | | | | | | "CUD" Series | | | | | | | | | | | | | | Part No. | Diameter | Material | Thickness | Feed Speed | RPM | | | | | | | | | CUD-250-2 | 1/4" | PB | 1/2"-3/4" | 600 IPM | 16,000 | | | | MDF | 1/2" | 500 IPM | 16,000 | | | | MDF | 3/4" | 400 IPM | 15,000 | | | | | | | | | CUD-375 | 3/8" | PB | 1/2"-3/4" | 900 IPM | 18,000 | | | | PB | 1/2"-3/4" | 450 IPM | 16,000 | | | | MDF | 1/2" | 400 IPM | 16,000 | | | | MDF | 3/4" | 350 IPM | 15,000 | | | | | | | | | CUD-500 Series 2+2 Tooth Design | 3/8" | PB | 1/2"-3/4" | 1800 IPM | 24,000 | | | | PB | 1/2"-3/4" | 1600 IPM | 22,000 | | | | PB | 1 1/4" | 900-1200 IPM | 18,000 | | | | MDF | 3/4" | 700-800 IPM | 17,000 | | | | MDF | 1 1/4" | 600 IPM | 16,000 | | | | | | | | | CUD-500 3+3 Tooth Design | 1/2" | PB | 1" | 80 MPM | 24,000 | | | | | | | | | CUD-375 3+3 Tooth Design | 3/8" | PB | 3/4" | 60 MPM 2400 IPM | 24,000 | | | | | | | | | Smoffer Series Smooth-Ruffer | | | | | | | | | | | | | Part No. | Diameter | Material | Thickness | Feed Speed | RPM | | | | | | | | | CRUP-375 3+3 | | PB | 3/4" | Fast | 24,000 | | | | MDF | 3/4" | Fast | 18,000 | | | | SolidWood | 1" | Fast | 18,000 | | | | PB | 1" | Fast | 18,000 | | | | MDF | 1" | Fast | 18,000 | | | | SolidWood | 1" | Fast | 18,000 | | | | | | | | | CUD-625-2 | 5/8" | PB | 1/2"-3/4" | 2400 IPM | 25,000 | | | | PB | 1/2"-3/4" | 2000 IPM | 22,000 | | | | PB | 1/2"-3/4" | 1500-1800 IPM | 20,000 | | | | PB | 1 1/4" | 1000-1200 IPM | 18,000 | | | | MDF | 3/4" | 1000 IPM | 18,000 | | | | MDF | 1 1/4" | 1000 IPM | 18,000 | | | | | | | | | CUD-750-2 | 3/4" | PB | 1/2"-3/4" | 2400 IPM | 25,000 | | | | PB | 1/2"-3/4" | 2000 IPM | 22,000 | | | | PB | 1/2"-3/4" | 1500-1800 IPM | 20,000 | | | | PB | 1 1/4" | 1000-1200 IPM | 18,000 | | | | MDF | 3/4" | 1000 IPM | 18,000 | | | | MDF | 1 1/4" | 10000 IPM | 18,000 | | | | | | | |
On the Smoffer series, As of Sept 05, No machine has maximized performance due to limitations. But as with all Courmatt's tools, with proper RPMs, tools will out preform any current tool in the market. If your serious about reduced cycles and lower tool cost per part. Submit a request to \n
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it .
Note:
Courmatt Int has provided maximum feed speeds. In the real world machines are different, along with horsepower, vacuum, POD systems, thickness of material etc. email or call for exact feeds & RPMs. With over thousands & thousands of applications. and thousands of tools. It would be difficult to provide on our web site all these formulas.
After 25 years in the tooling business Courmatt does have a data base for solutions.
The chart suggests maximum feed speeds on raw, single and double-sided laminate materials. Plywood's use the same chart as PB material. If machine capabilities are slower than recommended chart due to part layout or nesting, provide us with the data and a chart will be provided.
|
